Pinnacle periodically updates the firmware required to successfully connect hardware to our software platform. It is essential that users download the correct firmware for their hardware. Uploading the wrong firmware (i.e., 8206 firmware onto an 8401 device) will disable the device.
Device information is located in multiple places, including in the product manual, on the purchase order for the product, and on the device itself. If you are unable to successfully identify your device by the name and product number listed below, do NOT attempt to upload firmware.
Contact a Pinnacle representative at 782-832-8866 for assistance.
|8102 – Desktop Potentiostat System||DOWNLOAD|
|8102N – New Desktop Potentiostat System||DOWNLOAD|
|8106/8151 – Fixed Frequency System||DOWNLOAD|
|8163 – Frequency Agile System
The download for this system contains two HEX files. Users located in North American countries should upload the file with the extension “NA.” Users located in European countries should upload the file with the extension “EU.”
|8206-SL or -SE – Three-Channel 2EEG/1EMG System (Grey)||DOWNLOAD|
|8206HR-SL – Three-Channel 2EEG/1EMG SL System (Red)||DOWNLOAD|
|8206HR-SE – Three-Channel 2EEG/1EMG SE System (Red)||DOWNLOAD|
|8206-SE3 – Three-Channel 3EEG System (Grey)||DOWNLOAD|
|8206HR-SE3 – Three-Channel 3EEG SE System (Red)||DOWNLOAD|
|8229 – Sleep Deprivation System||DOWNLOAD|
|8274 Wireless Mouse EEG/EMG Hardware||DOWNLOAD|
|8274-D Wireless Mouse EEG/EMG Dongle (Requires Sirena 2.0.8 or later)
For updated 8274D firmware compatible with Sirenia 2.0.7 or earlier, please contact Pinnacle
|8401 – Four-Channel EEG/EMG/Bio System
This firmware is for the 8401 Data Conditioning and Acquisition unit and is NOT compatible with the 8401-HS.
|8401-HS – High Speed Four-Channel EEG/EMG/Bio System (not compatible with the original 8401)
The firmware below is only for 8401-HS REVA Hardware (Older units - Remove the cover. The board will be clearly marked with Rev A.
|8480 – Optogenetic Interface Module
This firmware is for the 8480 Optogenetic Interface Module. This is version 1.3.2 and is needed for Sirenia 1.7.6+
|9051 – Handheld Wireless Potentiostat System||DOWNLOAD|
Customers who require firmware for legacy devices should contact Pinnacle.